Cut Sheet

Pipe Straps, Conduit Clamps & Hangers
D-43
Metal Framing, Pipe Hangers and Accessories
Pipe Clamps (continued)
C-720P — PVC Coated Riser Clamp
The C-720P is normally used for the support of uninsulated
vertical piping where no movement will occur. PVC coating
the contact surface prevents galvanic corrosion with the pipe.
Please use our C-720 for carbon steel piping or CT-720
for copper tubing requirements.
NOTE: This product is not designed to be supported with rods. Install using
the maximum suggested torque values shown in the Technical Section of
this catalog.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 8,
MSS-SP-69 T1400°F / 600°C.
Finish: Polyvinyl Chloride.
Ordering: Specify pipe size and catalog number.
C-720P
PIPE MAX. A WT. EACH
CAT. NO. SIZE (IN.) LOAD (LBS.) (IN.) (LBS.)
C720P-1/2
1
⁄2 225 9
3
⁄8 1.30
C-720P-3/4
3
⁄4 225 9
3
⁄8 1.36
C-720P-1 1 225 9
5
⁄8 1.38
C-720P-1-1/4 1
1
⁄4 225 10 1.95
C-720P-1-1/2 1
1
⁄2 225 10
3
⁄8 2.01
C-720P-2 2 225 10
3
⁄4 2.17
C-720P-2-1/2 2
1
⁄2 390 11
1
⁄4 2.29
C-720P-3 3 530 12 2.50
C-720P-4 4 810 13
1
⁄2 3.42
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-720P
PVC Coating
4"
4"
A
CX-725 — Extended Offset Pipe Clamp
PIPE A B WT. EACH
CAT. NO. SIZE (IN.) (IN.) (IN.) (LBS.)
CX-725-3/8
3
⁄8 12 3
3
⁄4 1.85
CX-725-1/2
1
⁄2 12 3
3
⁄4 1.85
CX-725-3/4
3
⁄4 12 4
3
⁄4 1.85
CX-725-1 1125
1
⁄2 2.34
CX-725-1-1/4 1
1
⁄4 12 5
7
⁄8 2.40
CX-725-1-1/2 1
1
⁄2 12 6
1
⁄8 2.45
CX-725-2 2 12 7 3.13
CX-725-2-1/2 2
1
⁄2 12 7
1
⁄2 4.21
CX-725-3 3127
7
⁄8 4.47
CX-725-4 41210
1
⁄2 4.90
CX-725-5 51212
1
⁄4 4.90
CX-725-6 6 12 13 5.32
CX-725-8 81215
1
⁄4 11.20
CX-725-10 10 12 18
1
⁄4 13.50
CX-725-12 12 12 20
3
⁄4 22.00
CX-725-14 14 12 21 35.00
Standard Finish – GoldGalv
®
, unless otherwise stated.
CX-725
Designed to attach directly to piping where the exact distance between the
structure and the pipe cannot be determined until the piping is in place. The
extended legs can be modified in the field to suit the location. Legs of longer
lengths can be furnished on order.
Material: Carbon Steel.
Finish: Standard Finish –
Black (add suffix “-B”),
Electro-Galvanized
(add suffix “-EG”).
Ordering: Specify pipe size,
catalog number
and finish.
A
B
C-720L — Offset Pipe Clamp
The Offset Pipe Clamp is used on pipe lines running at a fixed distance
from a wall or floor. The standard clearance is two inches from the O.D. of
pipe to the face of the surface. Non-standard clearances can be fabricated
upon request.
Material: Carbon Steel.
Load Rating: Up to 650°F (343°C).
Finish: Standard Finish – GoldGalv
®
, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify pipe size, catalog number and finish.
C-720L
PIPE MAX. LOAD A B C WT. EACH
CAT. NO. SIZE (IN.) (LBS.) (IN.) (IN.) (IN.) (LBS.)
C-720L-1/2
1
⁄2 190 2
7
⁄16 8
1
⁄2
7
⁄16 1.1
C-720L-3/4
3
⁄4 190 2
3
⁄4 8
3
⁄4
7
⁄16 1.3
C-720L-1 1 190 2
7
⁄8 9
1
⁄4
7
⁄16 1.4
C-720L-1-1/4 1
1
⁄4 190 3
1
⁄16 9
3
⁄4
7
⁄16 1.5
C-720L-1-1/2 1
1
⁄2 190 3
3
⁄16 10
7
⁄16 1.6
C-720L-2 2 420 3
1
⁄2 11
1
⁄4
9
⁄16 2.8
C-720L-2-1/2 2
1
⁄2 420 3
3
⁄4 11
3
⁄4
9
⁄16 2.9
C-720L-3 3 420 4
1
⁄16 12
7
⁄8
9
⁄16 3.2
C-720L-4 4 610 4
9
⁄16 13
7
⁄8
9
⁄16 4.2
C-720L-5 5 610 5
1
⁄16 15
5
⁄8
11
⁄16 6.5
C-720L-6 6 870 5
5
⁄8 16
3
⁄4
11
⁄16 7.2
C-720L-8 8 870 6
5
⁄8 18
3
⁄4
11
⁄16 8.3
C-720L-10 10 1,050 7
3
⁄8 21
1
⁄2
13
⁄16 12.4
C-720L-12 12 1,200 8
3
⁄8 24
7
⁄8
13
⁄16 21.0
Standard Finish – GoldGalv
®
, unless otherwise stated.
A
B
C