Cut Sheet

Threaded Products & Hardware
D-8
Metal Framing, Pipe Hangers and Accessories
SIZE DESIGN STD.
CAT. NO. DESCRIPTION (IN.) LOAD LBS. CTN.
H 122 1/4
1
⁄4" Galv-Krom
®
1
⁄4 150 50
H 122 3/8
3
⁄8" Galv-Krom
®
3
⁄8 590 50
H 122 1/2
1
⁄2" Galv-Krom
®
1
⁄2 1,080 50
H 122 1/4 EG
1
⁄4" SilverGalv
®
1
⁄4 150 50
H 122 3/8 EG
3
⁄8" SilverGalv
®
3
⁄8 590 50
H 122 1/2 EG
1
⁄2" SilverGalv
®
1
⁄2 1,080 50
H 122 1/4 SS6
1
⁄4" Type 316 Stainless Steel
1
⁄4 150 50
H 122 3/8 SS6
3
⁄8" Type 316 Stainless Steel
3
⁄8 590 50
H 122 1/2 SS6
1
⁄2" Type 316 Stainless Steel
1
⁄2 1,080 50
Hold in the open position.
• No need to thread the Trapnut
®
fastener from either end of the
rod — saving valuable time
• Perfect for retro-fit applications where
the rod ends are not accessible
Press the pin with pliers.
• Locking pin holds it in the desired
position
• Can be removed and reused
Insert the bottom plate on the rod
and close the top plate.
• Precision threads trap the threaded
rod for a sturdy hold that can be
adjusted up or down for fine-tune
positioning
• Functions as a hex nut, square
washer and fla
t washer combined
Tighten to the desired position
with pliers.
• Can be adjusted up or down
for fine-tuned positioning
• Sturdy steel construction
tha
t is load bearing
• Sized to provide custom fit for
either 1
5
⁄8" or 1
1
⁄2" strut systems
1
Easy to Install
2
3
4
Features and Benefits
The unique scissor action of the Trapnut
®
Strut Fastener closes at any
desired position on the threaded rod. Once closed, precision threads trap the
threaded rod for a sturdy hold that can be adjusted up or down for fine-tune
positioning. While the versatile Trapnut has a locking pin that holds it in the
desired position, it can also be removed and reused.
Trapnut
®
Strut Fastener
Standard method using nuts
and washers.
New method using Trapnut
®
Strut Fastener.
Unlike a hex nut, there is no need to
thread the Trapnut
®
from either end of
the rod, saving valuable time on the job.
While the Trapnut
®
Strut Fastener is a
time-saver for new construction, it is
invaluable for retro-fit applications.
Rather than disassembling an existing
trapeze to run additional conduit above
it, the Trapnut
®
fastener can be clamped
between the existing trapeze and the
beam clamp for a speedy retro-fit solution.
It’s ideal for applications where the rod
ends are not accessible.
The Trapnut
®
fastener has a sturdy steel
construction that is load bearing, so you
can be confident of a solid installation.
And, the Trapnut
®
fastener functions
as a hex nut, square washer and flat
washer combined, so there are fewer
parts to keep up with on the job.
H 122 3⁄8
Trapnut
®
Strut
Fastener Galv-Krom
®
H 122 3⁄8 EG
Trapnut
®
Strut
Fastener SilverGalv
®