Technical Specifications

2 www.supervent.com
SuperVent Model JSC Technical Data Sheet
CERTIFICATION & APPLICATIONS:
SuperVent Model JSC is Safety Tested and Listed to applicable UL/ULC
Standards.
These include:
USA: UL 103-HT
Safety Standard for chimneys serving solid fuel and liquid fuel applications.
This chimney system has been designed for use on wood stoves, fireplaces
and residential furnaces in the U.S. market. Allowable Flue Gas Temperatures
are:
Maximum Continuous 1,000 degrees F / 540 degrees C
Brief Forced Firing 1,400 degrees F / 760 degrees C (60 minutes)
Creosote Burn Out 2,100 degrees F / 1,150 degrees C
(3 x 10 minutes)
A 2" clearance to combustible materials must be maintained at all times,
except in areas protected by factory supplied supports certified for reduced
clearance.
CLEARANCE TO COMBUSTIBLE MATERIALS:
CONSTRUCTION:
Inner Liner (Flue): •Upgraded Stainless Steel. •0.016" thickness
Outer Casing: •Upgraded Stainless Steel •0.015" thickness
Note: All SuperVent Twist-Lock Couplers are embossed
(not lanced) and seams are weather-proofed to prevent
moisture from entering the chimney.
Insulation:
The 1" space between inner/outer walls is Solid Packed with Mineral Wool
Fibre insulation to provide superior insulating qualities, in a “slim-line”
design. Solid Pack design performs favorably to Blanket type and Air-Cooled
chimney designs.
All SuperVent Supports are designed to carry four times the combined
weight of each system at maximum allowable height.
SUPPORTS/FRAMING
EMBOSSED COUPLER
Prevents moisture
penetration
UPGRADED STAINLESS
STEEL OUTER CASING
Premium material
prevents corrosion
”SOLID PACK”
INSULATION
Augured for better
insulating value
(than blanket insulation)
to keep outside
temperatures low - for
safety and inside
temperatures high - for
performance
UPGRADED STAINLESS
STEEL INNER LINER
High grade material
heats up quickly to
enhance draft
PREMIUM FIBRE
INSULATION
TWIST-LOCK
CONNECTION
Easy Assembly
The Best Warranty in the Industry
SuperVent features an advanced engineering design and premium quality material which allow us to offer a Lifetime Warranty
on all component parts. See written warranty for details.
Support and Framing Dimensions Table
Ceiling Support Wall Support Cath. Ceiling Support Roof Support
Support 50' 38' 38' 50'
Diameter Framming Dimensions
5" Dia. 12-3/8" x 12-3/8" 14-3/8" x 14-3/8" 11" x 11" N/A
6" Dia. 12-3/8" x 12-3/8" 14-3/8" x 14-3/8" 12" x 12" N/A
7" Dia. 13-3/8" x 13-3/8" 14-3/8" x 14-3/8" 13" x 13" N/A
8" Dia. 14-3/8" x 14-3/8" 14-3/8" x 14-3/8" 14" x 14" N/A