Installation Guide

Max. Pulling Capacity lbs kg ft/min m/m *12VDC Motor Current, Amps
4,000 lbs (1814 kg) 0 20.0 20
1,000 15.5
75
2,000 12.0 110
3,000 9.0 160
4,000 1814 5.5 1.6 220
INSPECTION and STORAGE
After use, repack the items neatly into the WINCH2GO™. Check all straps, shackles, pulley block,
and the power cord and controller cord for damage. ALWAYS review ALL components after winching,
and before the next winching operation. NEVER operate a winch with damaged components, and
ALWAYS use genuine Superwinch
®
replacement parts to ensure safety. Use of parts other than
genuine Superwinch
®
replacement parts can be unsafe and will void your warranty.
INTERMITTENT DUTY
If the motor stalls, do not continue to apply power. If the end of the motor becomes
hot, stop winching and allow the motor to cool. Do not touch the hot motor.
An electric winch is like any other motor driven power tool such as an electric drill or saw. The electric
motor should not be allowed to become excessively hot. Normal precautions will extend the life of your
motor. Keep the durations of pulls as short as possible.
For further information and complete warranty, visit our website, www.superwinch.com
The Winch Users Guide that accompanies this Technical Installation Guide provides information
on intermittent duty.
PERFORMANCE
INTERMITTENT DUTY
* Performance based on rst layer of rope wrapped on the drum
10
0 6.0
453 4.7
907 3.6
1360 2.7
LOAD SPEED CURRENT DRAW