Operation Manual

ENGLISH

USB port connection

● Ensure that your PC supports USB devices. (Refer to your PC manual for the

information about hardware).

● Connect your PC to the player using the USB cable.

● Press the PLAY key to turn ON the player. The LCD Screen will display a connecting

picture if connected properly.

● If you are using a PC that is running with Windows 98SE (or below) it is necessary

to install the software from the accompanying CD (provided). Simply insert the CD

and follow the on-screen instructions to install this software. This procedure is not

required when using Windows 2000, Windows ME, Windows XP or higher versions

thereof.

Sending and Deleting ﬁles between PC and Player

● Turn ON the player and connect it to your PC with the USB cable.

● It can be used like a Flash Disk to upload, download or delete file(s).

CAUTION

● Do not disconnect the player while a ﬁle is being downloaded. It could damage your

player.

● If the player does not work as expected, remove the battery and re-insert it into the

player after 3 seconds. Re-connect the player with the PC.

GENERAL USE