User's Manual

13
Useful Tips
Wear the pendant transmiers with the belt clip or lanyard and boom mic
for comfort and ease of usability.
Adjust the boom mic headset for comfort, and ensure that the microphone
is posioned correctly.
By selecng the Secondary (S) posion for the switch inside the 5M and 6M
baery compartment, the handheld can be controlled remotely from the
pendant transmier.
Consider hanging the Simeon Audita receiver from its keyhole, wall mounng
it, or using a tripod oor stand to ensure it is placed opmally.
Avoid approaching too close to the Receiver or Omnipanel with the
transmiers turned on this may cause a squeal or feedback from the
speakers.
Avoid excessive amplicaon soundeld will make speech clearly audible
at a comfortable listening level.
Use the tone control on the side of the Simeon Audita to ne-tune the
speakers sound. Your audiologist or sound professional may assist you with
this adjustment.
Use only the recommended baeries for the transmiers. Use only the
correct power adapter for the receiver and charging cradle.
If you have forgoen to charge the receiver and the internal baery is low, it
may be operated from an AC outlet via the charging power adapter.
Serial numbers are located on the back of the Simeon Audita, on the back of
the Omnipanel, on the boom of the 602, on the back of the 5T and 6T, and
inside the 5M and 6M baery compartments.