User's Manual

35
Region: Depending on the region, different channels are not supported. Consequently,
select the region in which the WiFi Network Camera is installed.
Encryption: Within the wireless network data is in most cases transmitted in encrypted form
to prevent third parties accessing the data. Specify what type of encoding is used in your
WLAN network.
If the setting “Unencrypted” is selected, data are transmitted without encryption. Where
one of the encryption types “WEP”, “ WPA” or “WPA2” is used, additional information about
the encryption must be provided. Take the exact settings that are displayed in the router or
Access Point.
The “Search” option can be used to automatically search for existing wireless networks.
Select the respective network from the list by highlighting it under “Selection” and click on
“Apply”. Where encryption data is required for the selected network, this data still has to be
entered.
Click on “Save” to accept the changes to the settings. Restart the WiFi Network Camera to
accept changes in the wireless settings.
Note:
t 5IFTFUUJOHTGPSUIFXJSFMFTTOFUXPSLTIPVMEOPUCFDIBOHFEUPFOTVSFUIFDPSSFDU
connection of the WiFi Network Camera.
t 5IFCBTJDTFUUJOHTPGUIFSPVUFSPSPGUIF"DDFTT1PJOUTIPVMEBMTPOPUCFDIBOHFE
unless where necessary. Otherwise this could lead to problems with other WLAN
devices in the network.