User's Manual

7.7. UPNP settings

Universal Plug and Play (UPnP) is used for controlling devices irrespective of their make

via an IP based network. Where UPnP is supported by the router and is also activated, the

required Firewall settings are automatically entered.

Select “UPnP settings” from the bottom menu bar.

Select “Use UPNP” if UPNP is to be used for connecting the WiFi Network Camera. “Use UPNP”

is normally activated as a default.

Click on “Save” to accept changes to the setting. Changes are accepted without the WiFi Net-

work Camera being restarted.