User's Manual

BioAdmin User Manual 146

Detailed operations are as follows.

z Press the Add New BEACon button on the task box.

z Select the communication method between Serial and TCP/IP.

z In case of serial, set COM port and network baudrate and incase of TCP/IP,

input IP address of BEACon to add. For how to check IP address in BEACon,

refer to BEACon manual.

z Input BEACon ID to add in BEACon ID field. For how to check ID in BEACon,

refer to BEACon manual.

z Designate and input BEACon name in Name field.

z If you press update attached BioEntry button, it starts searching applicable

BEACon and linked BioEntry device.

z As a result of search, linked BioEntry ID is indicated in BioEntry #1 and BioEntry

#2 fields. In case of failing to search BEACon due to wrong input of IP address

or ID, none is indicated here.

z Press ok button to view searched BEACon and linked BioEntry on device list.