User's Manual

BioAdmin User Manual 153

case of not using 1:N mode but using 1:1 mode only, choose none mode.

 T&A function key : T&A function key is to enter T&A event before entering

fingerprint for T&A control such as in, out, in duty, out duty. In BioStation,

usually from F1 to F4 function keys are used for this and, if necessary,

function key can be increased up to 16 keys. T&A key mode can be

chosen from function key mode and none mode. In case of using

BioStation for exclusive use of access control, choose none while in case of

using for T&A control, choose function key. Pressing T&A key on BioStation

first and then enter fingerprint to record applicable T&A event in a log. In the

future T&A software, this log information can be used for various T&A and

salary control data.

In case of changing settings such as various modes, changes are applied only

after apply button is pressed. For detailed explanation on buttons at lower part

of a window, refer to the previous page.

z Encryption Information

 Encryption: if you use encrypted template, encryption is Enable.

4.5.3. Network setting

This window shows setup for various networks of a device. As per interface

methods, it is divided into LAN, serial, and USB.

z LAN

In network setup list box at upper part of a window, set whether or not to use

LAN and if yes, whether to use cable LAN or wireless LAN. Specify a port as

1470.