User's Manual
41
ⒸCopyright 2006 Suprema Inc.
Fingerprint Setting
For Administrators -Advanced Functions
Fingerprint
◀ Normal ▶
Security
Fast Mode
Quality
View Image
Sensitivity
Timeout(Sec)
1:N Delay
Check Duplicate
◀ Auto ▶
◀ Normal ▶
◀ Visible ▶
◀ 7 (Max) ▶
◀ 10 ▶
◀ Not Use ▶
◀ 0 ▶
F1
More
l Setting : Visible/Invisible
l Proper enrollment can be induced by showing the image of the
entered fingerprint on LCD screen upon enrollment.
l Setting : 0(min)/1/2/3/4/5/6/7(max)
l Set sensitivity of fingerprint sensor in a capture of a fingerprint. At a
high sensitivity level, it is easier and faster to capture a fingerprint.
On the other hand, at a low sensitivity level, the image qualityof the
captured fingerprint can be more stable.
l In normal applications, maximum level is recommended. If the
recognition is not satisfactory for wet fingerprints, reducing
sensitivity may solve the problem.
l Setting : 1/2/…/10/…/19/20
l Set standby time for fingerprint enrollment. If a user does not place
a finger within the time, a timeout message appears on the display.
l Setting : 0/1/2/…./10
l It means the time of delay from 1:N authentication to next stand-by
authentication
l Setting : Not Check / Check
l In enrollment, checks whether the fingerprint is duplicated or not.
View Image
Sensitivity
Timeout(Sec)
Duplicate
1:N Delay