User's Manual

49
ⒸCopyright 2006 Suprema Inc.
Sub Zone
n To add anti-passbackor entrance limit functions, Sub Zone should be created
in a Zone.
n If you select Access Control on device menu and select Sub Zone,following
menus appear on display.
Change advanced access control settings – Sub Zone
l To make a Sub Zone, the device should be a master (Node Type
of Zone menu). If the device is a member but not a master, only
“Device Auth” can be set in this menu.
l Select an ID of a sub zone (from 0 to 15)
l Select a sub zone type either “APB” or “Entrance Limit”.
l Select a “Device ID” of a device to add in a sub zone. Then press
F1 and press F2 (Add).
l Then you can see the added device in “Device List” and the
increased number of the total devices in “Device Count”
l For deleting, select the device in “Device List” and then press F1
and F3 (Delete).
l When the device is a member of a zone (Node Type of Zone is set
as “Device”), Device Auth menu can be set to determine whether
authentication decision is done by master or standalone
l Setting: Standalone/Notify/Deferred
l Standalone, Notify : decision made by device itself.
l Deferred : Zone master decides the authentication result.
For APB and Entrance Limit, select this option.
SubZoneID
Zone Type
Device ID/List/Count
For Administrators -Advanced Functions
Zone
Zone
Sub Zone
APB Zone
Entrace Limit Zone
Sub Zone
◀ 0 ▶
SubZone ID
Zone Type
Device ID
Device List
Device Count
Device Auth
◀ 5225 ▶
◀ 5225 ▶
◀ ▶
◀ APB ▶
2
F1
More
Sub Zone
◀ 0 ▶
SubZone ID
Zone Type
Device ID
Device List
Device Count
Device Auth
◀ 5225 ▶
◀ 5225 ▶
◀ ▶
◀ APB ▶
2
OK
Apply
F2
Add
F3
Delete
F1
More
Device Auth