User Manual
Table Of Contents
- Innovative Fingerprint Terminal for Access Control and Time Attendance
- Contents
- Contents
- Safety precautions
- Safety precautions
- Glossary
- Basics of fingerprint recognition
- How to place a finger
- How to place a finger
- Product Contents
- Product Contents
- Name of each part
- Name of each part
- Installation
- Cable spec.
- For Administrators - Basic Functions
- Enter Admin Menu
- Using Admin Menu
- Operation mode setting
- TCP/IP
- Wireless LAN
- Serial
- USB
- Enroll New User
- Enroll New User
- Enroll New User
- Check User Info
- Edit User Info
- Delete User
- Delete All Users
- Check User DB
- For Administrators - Advanced Functions
- Display & Sound Setting
- Fingerprint Setting
- Fingerprint Setting
- I/O Setting
- Door Relay Setting
- Change Master Password
- View Device Info
- Device Reset
- Factory Default
- Check Log
- Filter Log
- Delete Entire Log
- USB Memory
- USB Memory
- For General Users
- Access using 1:N mode
- Access using 1:1 mode
- T&A event using 1:N mode
- T&A event using 1:1 mode
- Using extended T&A events
- View user’s Access/T&A event records
- Authentication procedure for each operation mode
- List of Admin Menu
- Specifications
- Troubleshooting
- Device cleaning
19
ⒸCopyright 2006 Suprema Inc.
Using Admin Menu
Main functions of initial Admin menu are as follows. For the entire Admin menu list, refer to
<List of Admin menu>.
z User : user management such as user enroll/delete/edit.
z Mode : set device’s operating mode.
z Display : set device’s language, background, sound volume, etc.
z Log : check the access and attendance event records.
z Device: set various settings for finger scan, I/O ports, door relay, etc.
z Network : set interface such as TCP/IP, serial communications, USB.
To enter a desired submenu from initial Admin menu, move to the desired menu using a
navigation key and press OK key.
In a submenu, you can move to desired item using up/down navigation key. To change
settings of each item, use left/right navigation key.
z If you press OK key, changed setting is applied and move to the previous menu. If you press ESC
key, changed setting is not applied and move to the previous menu.
Press F4 key anytime in Admin menu to exit from Admin menu and move to initial display.
z [Note] For security reasons, the display will automatically return to the initial display after a certain
time period without any key input in Admin menu. If you do not want this function or want to change
the time period, refer to <Display and sound setting>.
For Administrators - Basic Functions