User Manual
Table Of Contents
- Innovative Fingerprint Terminal for Access Control and Time Attendance
- Contents
- Contents
- Safety precautions
- Safety precautions
- Glossary
- Basics of fingerprint recognition
- How to place a finger
- How to place a finger
- Product Contents
- Product Contents
- Name of each part
- Name of each part
- Installation
- Cable spec.
- For Administrators - Basic Functions
- Enter Admin Menu
- Using Admin Menu
- Operation mode setting
- TCP/IP
- Wireless LAN
- Serial
- USB
- Enroll New User
- Enroll New User
- Enroll New User
- Check User Info
- Edit User Info
- Delete User
- Delete All Users
- Check User DB
- For Administrators - Advanced Functions
- Display & Sound Setting
- Fingerprint Setting
- Fingerprint Setting
- I/O Setting
- Door Relay Setting
- Change Master Password
- View Device Info
- Device Reset
- Factory Default
- Check Log
- Filter Log
- Delete Entire Log
- USB Memory
- USB Memory
- For General Users
- Access using 1:N mode
- Access using 1:1 mode
- T&A event using 1:N mode
- T&A event using 1:1 mode
- Using extended T&A events
- View user’s Access/T&A event records
- Authentication procedure for each operation mode
- List of Admin Menu
- Specifications
- Troubleshooting
- Device cleaning
36
ⒸCopyright 2006 Suprema Inc.
Fingerprint Setting
z Setting : Normal/Fast/Fastest
z Using 1:N mode with more than hundreds of users, identification may take somewhat longer. In this
case, you can change the fast mode to Fast or Fastest. By doing so, identification speed becomes
faster in sacrifice of a little higher FRR.
z Setting: Weak/Normal/Strict
z Quality level decides the strictness of quality check of the input images. With a strict quality level, the
device may reject a low quality input fingerprint more.
z Setting : Visible/Invisible
z Proper enrollment can be induced by showing the image of the entered fingerprint on LCD screen upon
enrollment.
z Setting : 0(min)/1/2/3/4/5/6/7(max)
z Set sensitivity of fingerprint sensor in a capture of a fingerprint. At a high sensitivity level, it is easier
and faster to capture a fingerprint. On the other hand, at a low sensitivity level, the image quality of the
captured fingerprint can be more stable.
z In normal applications, maximum level is recommended. If the recognition is not satisfactory for wet
fingerprints, reducing sensitivity may solve the problem.
z Setting : 1/2/…/10/…/19/20
z Set standby time for fingerprint enrollment. If a user does not place a finger within the time, a timeout
message appears on the display.
z Setting : Not Use / Use
z Shows whether the BioStation is curretnly using the template encryption or not. Encryption can not be
set on the device itself, but should be set using BioAdmin program on PC.
Fast Mode
Quality
View Image
Sensitivity
Timeout(Sec)
For Administrators - Advanced Functions
Encryption