User Manual
Table Of Contents
- Innovative Fingerprint Terminal for Access Control and Time Attendance
- Contents
- Contents
- Safety precautions
- Safety precautions
- Glossary
- Basics of fingerprint recognition
- How to place a finger
- How to place a finger
- Product Contents
- Product Contents
- Name of each part
- Name of each part
- Installation
- Cable spec.
- For Administrators - Basic Functions
- Enter Admin Menu
- Using Admin Menu
- Operation mode setting
- TCP/IP
- Wireless LAN
- Serial
- USB
- Enroll New User
- Enroll New User
- Enroll New User
- Check User Info
- Edit User Info
- Delete User
- Delete All Users
- Check User DB
- For Administrators - Advanced Functions
- Display & Sound Setting
- Fingerprint Setting
- Fingerprint Setting
- I/O Setting
- Door Relay Setting
- Change Master Password
- View Device Info
- Device Reset
- Factory Default
- Check Log
- Filter Log
- Delete Entire Log
- USB Memory
- USB Memory
- For General Users
- Access using 1:N mode
- Access using 1:1 mode
- T&A event using 1:N mode
- T&A event using 1:1 mode
- Using extended T&A events
- View user’s Access/T&A event records
- Authentication procedure for each operation mode
- List of Admin Menu
- Specifications
- Troubleshooting
- Device cleaning
37
ⒸCopyright 2006 Suprema Inc.
I/O Setting
If you select I/O on device menu, following menus appear on
display.
I/O
◁ Disabled ▷
Input 0
Input 1
Output 0
Output 1
Duration(ms)
Tamper SW
◀ Disabled ▶
◀ Disabled ▶
◀ Disabled ▶
1000
◀ None ▶
Change various settings for I/O.
z Setting : Disabled/Exit/Wiegand
z In case of using the input port for RTE(exit button), select Exit.
z In case of using input as Wiegand, input 0 and input 1 are set as
Wiegand.
z Setting: Disabled/Duress/Tamper SW/Auth Success/Auth
Fail/Wiegand
z Can send outputs for various events.
z In case of using output as Wiegand, output 0 and output 1 are set
as Wiegand.
z Set the cycle of output signal. Default is 1sec (1000ms).
z Setting : None/Lock System
z Tamper switch is turned on when a housing(case) of BioStation is
opened.
z If the setting is in “Lock System”, the device is automatically locked
when a tamper switch is on.
z This can be useful in security when an intruder opens the housing
of BioStation to enter a building.
z [Note] Once BioStation is locked, lock can be released only when
the master password is entered. It cannot be released by
administrator’s fingerprint.
Input 0 & Input 1
Output 0 & Output 1
Duration(ms)
Tamper S/W
For Administrators - Advanced Functions