User Manual
Table Of Contents
- Innovative Fingerprint Terminal for Access Control and Time Attendance
- Contents
- Contents
- Safety precautions
- Safety precautions
- Glossary
- Basics of fingerprint recognition
- How to place a finger
- How to place a finger
- Product Contents
- Product Contents
- Name of each part
- Name of each part
- Installation
- Cable spec.
- For Administrators - Basic Functions
- Enter Admin Menu
- Using Admin Menu
- Operation mode setting
- TCP/IP
- Wireless LAN
- Serial
- USB
- Enroll New User
- Enroll New User
- Enroll New User
- Check User Info
- Edit User Info
- Delete User
- Delete All Users
- Check User DB
- For Administrators - Advanced Functions
- Display & Sound Setting
- Fingerprint Setting
- Fingerprint Setting
- I/O Setting
- Door Relay Setting
- Change Master Password
- View Device Info
- Device Reset
- Factory Default
- Check Log
- Filter Log
- Delete Entire Log
- USB Memory
- USB Memory
- For General Users
- Access using 1:N mode
- Access using 1:1 mode
- T&A event using 1:N mode
- T&A event using 1:1 mode
- Using extended T&A events
- View user’s Access/T&A event records
- Authentication procedure for each operation mode
- List of Admin Menu
- Specifications
- Troubleshooting
- Device cleaning
![](/manual/suprema/biostationrfoc/user-manual-english/images/img-46.png)
46
ⒸCopyright 2006 Suprema Inc.
USB Memory
If you select USB Memory on Network menu, folloing menus
appear on the display.
When you are using wireless LAN, the wireless LAN is
automatically disconnected in this menu. When you go out of
this menu, wireless LAN is reconnected.
How to use USB memory to transfer user information, log data, and various settings of device.
For Administrators - Advanced Functions
z Transfer the user information and various settings from the virtual
terminal of USB memory to the connected BioStation. At the same
time, transfer the log data from the connected BioStation to the
virtual terminal of USB memory.
z [Note] Synchronize menu erases the current user information and
various settings of the device and overwrite with the information
and settings on USB memry.
z Useful in trasfering the data from BioAdmin program to device.
z Enabled only when the USB memory has a virtual terminal with the
same device ID as that of the connected BioStation.
z Create a virtual terminal on USB memory with the same device ID.
Export the user inforamation, log data, and various settings of the
connected device to the virtual terminal on USB memory.
z It may take a few minutes depending on the size of the user
information and log data to export.
z To synchronize or import virtual terminal, you need to create a
virtual terminal first on the USB memory by using Export Virtual
Terminal menu.
z This menu is enabled only when a USB memory is connected to
BioStation.
Synchronize
Export Virtual Terminal
USB Memory
Synchronize
Export Virtual Terminal
Import Virtual Terminal
Firmware Upgrade
Initialize
Refresh