User Manual
Table Of Contents
- Innovative Fingerprint Terminal for Access Control and Time Attendance
- Contents
- Contents
- Safety precautions
- Safety precautions
- Glossary
- Basics of fingerprint recognition
- How to place a finger
- How to place a finger
- Product Contents
- Product Contents
- Name of each part
- Name of each part
- Installation
- Cable spec.
- For Administrators - Basic Functions
- Enter Admin Menu
- Using Admin Menu
- Operation mode setting
- TCP/IP
- Wireless LAN
- Serial
- USB
- Enroll New User
- Enroll New User
- Enroll New User
- Check User Info
- Edit User Info
- Delete User
- Delete All Users
- Check User DB
- For Administrators - Advanced Functions
- Display & Sound Setting
- Fingerprint Setting
- Fingerprint Setting
- I/O Setting
- Door Relay Setting
- Change Master Password
- View Device Info
- Device Reset
- Factory Default
- Check Log
- Filter Log
- Delete Entire Log
- USB Memory
- USB Memory
- For General Users
- Access using 1:N mode
- Access using 1:1 mode
- T&A event using 1:N mode
- T&A event using 1:1 mode
- Using extended T&A events
- View user’s Access/T&A event records
- Authentication procedure for each operation mode
- List of Admin Menu
- Specifications
- Troubleshooting
- Device cleaning
23
ⒸCopyright 2006 Suprema Inc.
Serial
To connect the BioStation to the serial port of host PC,
designate the buadrate of the serial communication.
RS485
z Setting :Disable/9600/19200/38400/57600/115200
z Used when connecting to the serial port of PC using 7pin
connector on the rear of the device.
z In the serial communication, the speed represents the frequency of
carrier wave’s changing status per sec, called baudrate.
z Default is 115200 bps.
z If you have communication error in serial communication, setting a
lower baudrate may solve the problem.
z Setting : Disabled/9600/19200/38400/57600/115200
z Used when connecting to the serial port of PC using 4pin
connector on the rear of the device.
Serial
◁ 115200 ▷
RS485
RS232
For Administrators - Basic Functions
◀ 115200 ▶
RS232
To connect BioStation to the serial port of PC, you need to select the buadrate of the serial communication.