Contents Safety precautions Product components Optional accessories Names of each parts Product Dimension Cables and Connectors Power Connection LAN Connection RS485 Connection Relay Connection Digital Input Connection Wiegand Input/Output Output Installation of Wall-mount Bracket Installation Reference Specification Electrical Specification FCC Rules
Safety precautions Do not install the device in a place subject to direct sun light, humidity, dust or soot. Do not place the device next to heating equipments. Do not place a magnet near the product. In cleaning, do not splash water on the device but wipe it out with smooth cloth or towel. It may cause a damage or a failure to the product. Be careful not to let liquid like water, drinks or chemicals leak inside the device. Clean the device often to remove dust on it. It may cause a failure.
Safety precautions Do not drop the device. Do not disassemble, repair or alter the device. The warranty does net apply to any product damage cause by an arbitrary installation or repair. Do not let children touch the device without supervision. Do not use the device for any other purpose than specified. Do not damage the device. Contact your nearest dealer in case of a trouble or problem. The list above is to keep user’s safety and prevent any loss. Please read safety precautions carefully before use.
Product components Basic components Xpass Wall mounting screws (2 ea) bracket Knife Blocks (2 ea) Extended Ethernet Cable Shrinkable Tubes Software CD The components shown above may differ depending on the installation environment.
Optional accessories Secure I/O Plastic stand Extended bracket adaptor
Names of each parts
LED status
*OJUJBMJ[BUJPO PG OFUXPSL TFUUJOH 8IFO ZPV JOTUBMM UIF 9QBTT PS GPSHFU UIF OFUXPSL TFUUJOH’T WBMVF PG 9QBTT JO VTF DBO JOJUJBM UIF OFUXPSL TFUUJOH’T WBMVF 5$1 *1 BEESFTT 34 TFUUJOH JO UIF TXJUDI PG 9QBTT’T CBDL TJEF BT GPMMPXT
Product Dimension (unit : mm) < Front View > < Side View > < Bracket > < Extended bracket >
Cables and Connectors No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin Name 485 GND Wiegand-GND 485 Wiegand-1 485 + Wiegand-0 Input-1 Relay Open Input-GND Relay Com Input-0 Relay Close TX+ (LAN) Power IN+ TX- (LAN) Power INRX+ (LAN) Power OUT+ RX- (LAN) Power OUTVB1 VB2 VB1 VB2 Color White (black string) Black Yellow (black string) White Blue (white string) Green Brown Gray (white string) Gray Green (white string) Purple Orange (black string) Pink Red Orange Black (white string)
Cables and Connectors Cable Specification Pin 1 2 3 4 5 6 7 8 9 10 11 12 Relay Wiegand Switch 485 Pin 3 1 Power Pin Name Color RLY NC RLY COM RLY NO WGD D0 WGD D1 WGD GND IN 0 IN 1 IN GND 485+ 485485 GND Orange (black string) Green (white string) Gray (white string) Green White Black Purple Brown Gray Blue (white string) Yellow (black string) White (black string) Pin Name POWER OUT POWER OUT + POWER IN POWER IN + ᔪᔢ Black (white string) Light Blue Black (white string) Red
LAN cable Pin 1 2 3 4 5 6 7 8 LAN Pin Name Color RXRX+ TXTX+ VB1 VB1 VB2 VB2 Yellow Blue Orange Pink (SFFO black string) (SFFO black string) Brown (white string) Brown (white string) Ethernet extension cable Modular Jack (A) Connector (B) Pin Name Color TX+ Blue TX- Orange RX+ Black RX- Yellow VB1 Red VB1 Green VB2 Brown VB2 Gray
Power Connection 1 Pin Pin Name Color 14 POWER IN+ Red 16 POWER IN- Black (white string) Recommended power supply 12V · 10%, at least 500mA. Comply with standard IEC/EN 60950-1. To share the power with other devices, use a power supply with higher current ratings.
Power Connection 2 Recommended power supply Please use the distance of LAN cable within 100m in case of POE power.
LAN Connection
LAN Connection (Direct connection with PC)
RS485 Connection for Host Communication Pin Pin Name Color 1 485 GND White (black string) 3 485 - Yellow (black string) 5 485 + Blue (white string)
RS485 Connection for Secure I/O Pin Pin Name Color 1 485 GND White (black string) 3 485 - Yellow (black string) 5 485 + Blue (white string) Max number of devices Maximum eight(8) devices (including Master) interworks in an RS485 loop.
Relay Connection – Fail safe lock Pin Pin Name Color 10 RLY COM Green (white string) 12 RLY NC Orange (black string)
Relay Connection – Fail secure lock Pin Pin Name Color 8 RLY NO Gray (white string) 10 RLY COM Green (white string)
Relay Connection - Automatic door Pin Pin Name Color 8 RLY NO Gray (white string) 10 RLY COM Green (white string)
Digital Input Connection (Alarm, Emergency S/W) Pin Pin Name Color 7 IN 1 Brown 9 IN GND Gray 11 IN 0 Purple
Digital Input Connection (RTE, Door sensor) Pin Pin Name Color 7 IN 1 Brown 9 IN GND Gray 11 IN 0 Purple
Wiegand Input/Output Wiegand Input Wiegand Output Pin Pin Name Color 2 WGD GND Black 4 WGD D1 White 6 WGD D0 Green Pin Pin Name Color 2 WGD GND Black 4 WGD D1 White 6 WGD D0 Green
Output Pin Pin Name Color 10 RLY COM Green (white string) 12 RLY NC Orange (black string) 18 PWR OUT + Light Blue 20 PWR OUT - Black (white string) Caution : Max. 700mA is supplied using adapter for the external output. Be careful to satisfy the power capacity in use.
Installation of Wall-mount Bracket Fix wall mount bracket on a wall using wall mounting screws Hook Xpass on the wall mount bracket Fix Xpass and wall mounting bracket using a wall mounting screw.
Installation Reference 1 - Stand alone
Installation Reference 2 – Standalone (Secure)
Installation Reference 3 – Network
Specification CPU Memory 32 bit Micro-processor User Capacity 8MB FLASH + 16MB SDRAM 13.
Electrical Specification Min. Typ. Max. Notes 10.8 12 13.2 Use regulated DC power adaptor only Power Voltage (V) Current (mA) - 140 Switch Input VIH (V) - TBD - VIL (V) - TBD Pull-up resistance (Ⳋ) - 4.7k - VOH (V) - 5 - VOL (V) - 0.8 - Pull-up resistance (Ⳋ) - 4.7k - - - 1 0.3 30V DC 125V AC DC AC DC AC The input ports are pulled up with 4.7k resistors TTL/Wiegand Output The outputs ports are open drain type, pulled up with 4.
FCC Rules Caution Warning Information to User Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation.