Owner manual

SS 4 Assembly

STEP SEVEN

a. On the inside bottom of the side burner assembly

you will find the brass burner cap attached with

tape. Remove and set aside.

b. Feed the side burner gas supply hose assembly

and two igniter wires through the grommeted hole

in the side of the cart.

c. Place a piece of styrofoam from the packaging in

the grill to leave the grill hood propped open

slightly.

d. Attach the right side burner shelf by inserting the

four shelf hooks into the slots on the side of the

grill.

e. After inserting the four shelf hooks, press the shelf

against the grill and press downward until the

shelf locks in place. Make sure the top trim strip is

all the way inside of the grill before pressing

downward.

f. Install one self tapping screw into the bottom front

hole of the shelf and one through the bottom back

shelf hook from the back side of the grill. This will

permanently lock the shelf in place.

g. Install one self tapping screw into the back

hole on the shelf top. This will lock the

shelf in place more stably.