Owner manual

STEP NINE

a. Place the electronic igniter into the igniter hole on

the front left of the side burner shelf. To help ease

the installation of the wires, make certain that the

igniter wire tabs are facing outwards from the grill.

b. Secure the igniter in place using the plastic lock nut.

Make sure to tighten securely.

c. Install AA battery, negative side first.

d. Install spring and cap assembly and tighten

securely.

e. Attach loose wire to bottom of cast burner, and then

to any of the open tabs in the igniter. Insert the

two igniter wires fed through the grommeted hole

on side of grill cart in Step 7b into the remaining

two holes.

Note: The igniter is designed in such a way

that it does not matter which terminal tab is

used when connecting igniter wires.

SS 4 Assembly

Close-up of igniter wires attaching to igniter.

Close-up of igniter wire attaching to burner.