MSDS

---------------------------------------------------------------------------

COMPLEMENTARY COATINGS CORP

MATERIAL SAFETY DATA SHEET

SU0998092-01 1

---------------------------------------------------------------------------

SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION

---------------------------------------------------------------------------

VENTILATION

Local exhaust preferable. General exhaust acceptable if the

exposure to chemicals in Section 2 is maintained below applicable

exposure limits.

RESPIRATORY PROTECTION

Where exposures are below the PEL, no respiratory protection is

required. Where exposures exceed the PEL, use a respirator approved by

NIOSH or a full protective suit with air supply appropriate for the

chemical(s) and level of exposure.

EYE PROTECTION

Wear safety spectacles with unperforated side shields.

PROTECTIVE GLOVES

None required for normal application of limited duration is expected.

For long or repeated contact, wear chemical resistant gloves.

---------------------------------------------------------------------------

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

---------------------------------------------------------------------------

Vapor Density . . . . . . . . . . . . : N/A

Vapor Pressure . . . . . . . . . . . : 17mmHg@ 68 Degrees F (water)

Physical State . . . . . . . . . . . .: LIQUID

Boiling Point Range . . . . . . . . . : Lower - 212.0 °F

Higher - 374.0 °F

Specific Gravity . . . . . . . . . . : 1.377

Weight per Volume . . . . . . . . . . : 11.4576 LB/GL

VOC - Total (lb/gal). . . . . . . . . : 1.073

Evaporation Rate . . . . . . . . . . .: .080 (n-Butyl Acetate = 1)

Volatile by Weight . . . . . . . . . : 44.0945

Volatile by Volume . . . . . . . . . : 61.1813

---------------------------------------------------------------------------

SECTION 10 - STABILITY AND REACTIVITY

---------------------------------------------------------------------------

STABILITY

This product is stable.

INCOMPATIBILITIES (Materials to Avoid)

None known.

HAZARDOUS POLYMERIZATION

Will not occur.

CONDITIONS TO AVOID

High temperatures.