User's Manual

CQL1410-BM Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
 Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located on
the top of the unit and then plug the USB connecter into the USB port on a computer
for charging.
 A red light on the top will indicate the charging situation. When battery is full, the red
light will turn off automatically.
Bluetooth Speaker Operation
 Turn on the unit by pushing the switch on the top. A Blue light on the top will start
blinking to indicate the speaker is in paring mode and searching for your Bluetooth
mobile device.
 Bluetooth speaker device name is “XXX”, connect it via the option menu of your
mobile device, pairing mode is 0000 if any is required. The Blue light will begin to
flashing four times every 3 seconds after pair is complete.
 Start playing music on your device. Keep your device within 33feet (10m) of your
speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit when not in used.
Universal Speaker Operation
 For other music devices without Bluetooth, use the attached audio input cable. Insert
the 3.5 mm jacks into the “AUX-IN” jack and into the earphone jack on your device.
 Turn on the unit and start playing music.
 Turn off the unit when not in used.
Caution:
 This is not a toy. Please keep away from small children.
 Please keep away from water / heat.
 Low power may cause poor connection even no working of Bluetooth.
 Do not over charge the battery.
FCC STATEMENT
1.This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.