User Manual

CQL1483-B (PBT522) Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

z Works on internal rechargeable Lithium battery. Please charge your speaker fully

before first use. To charge the battery :

Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the

back of the unit and then plug the USB connector into the USB port on a computer for

charging.

z A red light aside will indicate the charging situation. When battery is full, the red light

will turn off automatically.

Bluetooth Speaker Operation

z Turn on the unit by pushing the Off On switch at the back. A Blue light aside will start

blinking to indicate the speaker is in paring mode and searching for your Bluetooth

mobile device.

z Bluetooth speaker device name is “PBT522”, connect it via the option menu of your

mobile device, pairing mode is 0000 if any is required. The Blue light will begin to

flash slowly after the pair is complete.

z Once connected, press

at the front of the Bluetooth speaker or press play on

your mobile phone to start enjoying music. When the playback has begun, press

to pause/resume your music at any time.

z Quick press the “+” button at the front to skip to the next song and quick press the “-”

button to play your previous song.

z To adjust the volume of your device: Long press the “+” button to increase the volume

and long press the “-” button to decrease the volume.

z Keep your device within 33 feet (10m) of your speaker.

z Long press the

button to disconnect with the Bluetooth. A tone will be heard after

the pair is disconnected. Turn off the unit when not used.

Universal Speaker Operation

z For other music devices without Bluetooth, use the attached audio input cable. Insert

the 3.5 mm jacks into the “Aux-in” jack at the back of the unit and into the earphone

jack on your device.

z Turn on the unit and start playing music.

z To skip songs and adjust the volume, please refer to Bluetooth speaker operation

above.

z Turn off the unit when not in used.

Caution:

z This is not a toy. Please keep away from small children.

z Please keep away from water/heat.

PAGE 1
CQL1483-B (PBT522) Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z z Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the unit and then plug the USB connector into the USB port on a computer for charging. A red light aside will indicate the charging situation.
PAGE 2
z z Low power may cause poor connection even no working of Bluetooth. Do not overcharge the battery. FCC Statement z z z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.