User's Manual

CQL1508-B/SBT6001 Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
 Please charge your Bluetooth speaker fully before first use.
To charge the battery:
 Using a Micro USB cable (included), insert the USB power cable into the micro
USB port located on the back of the speaker. Connect the other end of the USB
cord into a powered USB source such as a computer, laptop or USB AC adapter.
 When your Bluetooth speaker is charging, the indicator light will turn red.
 Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth
 Turn your Bluetooth speaker on by sliding the power switch located on the
bottom of the speaker to ‘ON’ position.
 The blue indicator light will flash quickly. This indicates that the speaker is in
pairing mode and is searching for your Bluetooth device.
 Make sure the Bluetooth function on your device is turned on.
 Search the speaker named,” CQL1508-B”.
 Once you have selected the speaker, your device will pair without a password. (If
your device prompts for a password, enter the password”0000”).
 Once your speaker is paired, the blue indicator light will begin to flash slowly.
 Charge your Strip LEDs to the back of the Bluetooth speaker. Start playing music
on your mobile device. The LED lights will dance to your music.
 Make sure that you keep your device within 33 feet of your Bluetooth speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit when not in use.
Lights Dance to the Music
 Turn on the Bluetooth speaker and charge your Strip LEDs to the back of the
Bluetooth speaker.
 Lights are always on when not playing music.
 Lights dance to your music when playing music via your mobile device.
 Lights are always on when pause the music.
 Turn off the unit when not used.