Instruction Manual

CQL1524-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Getting Started

z Please charge your Bluetooth speaker fully before its first use.

z To charge the battery:

Using a Micro USB Charging Cable (included), insert the USB power cable into

the micro USB port located on the left of the speaker. Connect the other end of

the USB cord into a powered USB source such as a computer, laptop or USB AC

adapter.

The LED indicator will turn RED while charging and turn off when fully charged.

On low power, a tone will be periodically heard, indicating that the speaker should

be charged.

The speaker will power off automatically when there is no any device connected

over 5 mins.

Powering ON/OFF

z Press and hold the button, a voice will be heard indicating power on and the

Bluetooth LED indicator will quickly flash .

z The speaker will enter Bluetooth pairing mode. The speaker will automatically

re-pair to any nearby previously paired devices.

z Press and hold the button again, a voice will be heard indicating power off.

Playing Music via Bluetooth

z Press and hold the button, the speaker will enter Bluetooth pairing mode and

the Bluetooth LED indicator quickly flashing.

z Make sure the Bluetooth function on your device is turned on.

z Search the speaker named “ XXX ”.

z Once you have selected the speaker, your device will pair without a password. (If

your device prompts for a password, enter the passwordā0000ā.)

z After a successful pairing, a voice will be heard and the Bluetooth LED indicator

will be solid blue.

z Start playing music on your device. Make sure that you keep your device within a

33 feet range of your Bluetooth speaker.

z Adjust the volume of your device to a comfortable level.

z Turn off the unit when not in use.

Adjusting Volume and Playback

z Press and hold the and buttons on speaker to adjust volume, or use the

controls on a connected device. A voice will be heard when the volume reach

maximum.

PAGE 1
CQL1524-B Bluetooth Speaker Instruction Manual (Read before proceeding) Getting Started z Please charge your Bluetooth speaker fully before its first use. z To charge the battery: Using a Micro USB Charging Cable (included), insert the USB power cable into the micro USB port located on the left of the speaker. Connect the other end of the USB cord into a powered USB source such as a computer, laptop or USB AC adapter. The LED indicator will turn RED while charging and turn off when fully charged.
PAGE 2
z z z z z z Press the and buttons on the speaker to skip tracks Press the button to pause and resume playback. Press and hold the button, a voice will be heard, Bluetooth will be disconnected, press again to reconnect. Press the button to answer an incoming phone call. Press again to end the call. Double press the button to redial the last outgoing number. Press and hold the button to reject an incoming call. Caution: z This is not a toy. Please keep away from children.
PAGE 3
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.