Instruction Manual

CQL1646-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Charging the Speaker
z The speaker works on an internal rechargeable lithium battery. Please charge your speaker
fully before first use.
z Insert the small connector of the supplied micro-USB cable into the micro-USB charging port on
the side of the speaker. Insert the large connector into the USB port on a computer, a USB
charging device ,or 5V USB adapter(not included) and plug into a wall socket.
z The LED indicator will turn RED while charging and turn OFF when fully charged.
z Disconnect the USB cable when it is fully charged.
Bluetooth Operation
z Slide the “POWER” switch to the ON position to power the speaker on.
z A tone will be heard and the speaker will enter Bluetooth pairing mode or re-pair to a
previously-paired device.
z A tone will be heard and the Bluetooth LED indicator will quickly flash BLUE.
z Set your mobile device to search for Bluetooth devices, when it appears, select “SB-10” from
the list of found devices. You device will pair without a password but if required enter 0000 to
finalise the pairing.
z Once successfully paired , a tone will be heard and the Bluetooth LED indicator will slowly flash
Blue.
z Start playing music on your device. Keep your device within 10 meters of your speaker to
ensure optimal audio quality.
z Turn the speaker off when not in use by flicking switch to the OFF position.
Light Operation
z Quick press the [ ] button to cycle through the speaker light modes. There are 4 LED Light modes in
total.
-White light only
-Flashing colorful light
-Gradient seven color lights
-RGB light dance and response to the music
z Quick press five times to turn off the LED light.
Caution:
z This is not a toy. Please keep away from children.
z Please keep away from water / heat.
z Low power may cause poor connection even no working of Bluetooth.
z Do not overcharge the battery.
z Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like