Instruction Manual

button to change the digit)
z Press it one time again, the hour digit for the alarm time will start blinking (press
the right bottom button to change the digit)
z Press it one time again, the minute digit for the alarm time will start blinking (press
the right bottom button to change the digit)
At night, when users cannot see the clock digits, short press this button one time to
turn the backlight on, the the screen will be lighted up. After 10S, the backlight will turn
off automatically.
:
z Press it to increase the digit from 01-12 for hour digit and increase the digit from
00-59 for minute digit. This button is can only increase the digit and cannot decrease
the digit.
z The display for time and alarm is AM and PM.
Note:
****The Bluetooth indicator light in the front will turn off automatically if the
Bluetooth is not paired to the mobile phone for 5 MINS. To use the Bluetooth
function again, please turn Off and On the switch again.
****While you turn off the unit, the time has its memory as long as there is still
battery left of the speaker.
****If the speaker is with no battery inside at all, the time cannot memorize its track.
The users need to charge the unit and reset the time again.
Wireless Charing Function:
Charging the unit with a 5V 2A adaptor and USB cable. The right side red light in the
back will turn solid red, meaning the wireless charging function is enabled,
put your
phone on the wireless charging pad of the speaker, if the phone is charging, this light will
turn solid blue, white means the phone is in charging status.