Instruction Manual
CQL1699-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
z Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use.
To charge the battery use the micro USB cable( included): insert the jack
into ”Charging” jack located on the back of the unit and then plug the USB connecter
of charging cable into the USB port on a computer for charging.
z A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
z Disconnect the USB cable when it is fully charged.
Playing Music Via Bluetooth
z Switch the volume button to the right to turn the product on. A tone will be heard.
z Make sure the On Off button in the back is in the On positon which means the
Bluetooth function of the unit is enabled and it’s NOT in the soothing sound mode.
z The blue indicator light in the back will flash quickly. This indicates that the speaker in
pairing mode and searching for your Bluetooth device.
z Turn on the Bluetooth function on your device, search the speaker named “XXXX”
and select it, your device will pair without a password. (If required, enter the password
“0000” to finalize the paring).The Blue light will begin to flash slowly after pair is
complete.
z Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
z Adjust volume by turning the volume button in the front.
z Turn off the unit when not in used.
Enjoy Soothing sounds
z Switch the volume button to the right to turn the product on. A tone will be heard.
z Make sure the On Off button in the back is in the Off positon which means the
Bluetooth function of the unit is turned off and it’s in the soothing sound mode.