Instruction Manual

CQL1706-B/SLK1030BT Bluetooth Speaker SURE
Instruction Manual (Read before proceeding)
Power:
 Using a Micro USB cable (included), plug the small connector into the ”Charging” port
on the back of unit, then plug the large connector into a USB power port, or into a
compatible 5V USB adapter( not included) and plug into a wall socket.
 A red light will turn on if the unit connected to power source.
Bluetooth Speaker Operation
 Turn on the unit by pushing the switch to “ON” position. The LED light on top will light
on indicate the speaker is in paring mode and searching for your Bluetooth mobile
device.
 Open the Bluetooth function on your device and search the speaker named
“SLK1030BT”. After selecting this speaker, your device will pair without a password.
(If required, enter the password “0000” to finalize the paring).The Blue light will begin
to flash slowly after pair is complete.
 Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
 Adjust the volume of your device to a comfortable level.
 Control play/pause, volume up/next track and volume down/previous track either on
your connected device or by the buttons on the fabric of the speaker.
 Turn off the unit when not in use.
Light Operation