MSDS

MATERIAL SAFETY DATA SHEET
Page 1 of 6
Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Union standards
1. PRODUCT IDENTIFICATION
TRADE NAME (AS LABELED): FPC 925
CHEMICAL NAME: EVA Based Formulation
PRODUCT USE: Hot Melt Adhesive
MANUFACTURER'S NAME: FPC Corporation
ADDRESS: 355 Hollow Hill Drive
Wauconda, IL 60084
BUSINESS PHONE: 847-487-4583
FAX NUMBER: 847-487-0174
DATE OF PREPARATION: May 6, 2011
2. HAZARD IDENTIFICATION
EU DANGEROUS PREPARATIONS DIRECTIVE (DPD) LABELING AND CLASSIFICATION: This product does meet the
definition of a hazard class, as defined by the European Union Council Directives 67/548/EEC and 1999/445/EC and
subsequent Directives.
Hazard Classification: [Xi] Irritant, [Xn] Harmful
Risk Phrases: R21; R36/37/38
Safety Phrases: S23; S24/25
Annex II Hazard Symbol:
EMERGENCY OVERVIEW: Product Description: This product is a white solid, with a negligible odor. Health
Hazards: Contact with this material can cause irritation to the skin, eyes and mucous membranes. Contact with molten
material will cause thermal burns. Flammability Hazards: This product is Flammable at elevated temperatures.
Reactivity Hazards: None Environmental Hazards: This material is not expected to be an environmental hazard
Emergency Considerations: Emergency responders must wear the proper personal protective equipment (and have
appropriate fire-suppression equipment) suitable for the situation to which they are responding.
3. COMPOSITION and INFORMATION ON INGREDIENTS
Hazardous Ingredients:
CAS #
EINECS #
ICSC #
WT %
Hazard Symbol;
Risk Phrases
No Hazardous Ingredients
NA
Not Listed
Not Listed
100%
HAZARD CLASSIFICATION: NOT CLASSIFIED
RISK PHRASES: NONE
Balance of other components. Each of the other components is present in less than 1
percent concentration (0.1% concentration for potential carcinogens, reproductive toxins,
respiratory tract sensitizers, and mutagens)
NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2004 format. This
product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR, EU Directives and the Japanese Industrial Standard JIS Z 7250: 2000. This material is
classified as non-hazardous under OSHA regulations 29 CFR 1910.1200.
See Section 15 for full text of Ingredient Risk Phrases and Safety Phrases

Summary of content (6 pages)