Instructions / Assembly

SPECIFICATIONS
Overall Dimensions: 9.65" x 9.61" x 2.08”
Capacity: 100 nails
Nail Length: 3/4”- 2”
Nail size: 18 Gauge
Operating Pressure: 60 - 100 PSI (4-7 bar)
Air Inlet Size: 1 /4” N .P.T
Weight of Tool: 2.82 lbs.
NAIL SELECTION
Use SUREBONDER 400 Series
18 gauge brad nails
3/4" to 2".
1/4” Male Quick
Release Connector
Trigger
Rubber Grip
Nail magazine
Nail viewer
Track Release
Contact Safety Mechanism
Protective Tip
Adjustable
Exhaust Cover
OPERATION
min. 3/4" (19 mm)
max. 2 "(51 mm)
Min Max
5
6
Jam Clearing Lift up on latch and swing guide plate outward. Remove jammed nail, replace
guide plate catch and push latch down.
Exhaust Deflector Exhaust deflector can be positioned to point in any 360° direction.
Reposition deflector by rotating to the desired position.
Depth Adjustment
Using thumb screw to achieve desired depth.
18
Gauge
Depth Adjustment Knob
Turn knob clockwise-for more depth
Turn knob counter-clockwise- for less depth
Depth Adjustment
Latch
Loading Nails (continued)
To load:
Detach nailer from air supply. Push magazine release to release magazine cover. Do not load with
contact safety mechanism or trigger depressed. Slide magazine cover towards the front of the
magazine and lock closed.
Drop in nails.
Push magazine cover closed until it locks.