Replacement Part List

IMPORTANT SAFETY INSTRUCTIONS (continued)
Plug the glue gun into any AC outlet with required specifications.
If an extension cord must be used, use a heavy duty extension cord
that complies with all state and local electrical codes.
Keep glue gun cord away from heat, solvents, sharp edges and objects, or anything that might
cause damage.
If cord becomes damaged, a qualified electrical technician should replace it.
Unplug after use. Do not keep glue gun plugged in and unused for more than 2 hours, otherwise
degradation of the adhesive and charring of the nozzle can occur. working on application again.
If gun has not been used for more then 30 minutes or longer, squeeze trigger several
times to expel old glue from gun before working on application again.
Do not remove the glue stick from the back of the tool at any time. This may cause molten
adhesive to flow from the opening of the tool causing burns or permanently damaging glue gun.
Use only glue sticks recommended for your application.
Save this manual and have it available for tool operators reference!
Electrical warning
Hot Melt Glue Sticks - Formula Descriptions
Product Application Open Time Adhesive Color
#601 Low Melt for sealing corrugated cartons 5 seconds Tan
#701 Fast-Setting carton sealing adhesive
1
5 seconds Tan
#702 Very-fast setting carton sealing adhesive 5-10 seconds Tan
#707 High-Performance for difficult to bond 30 seconds Clear
#708 High Strength for carpet backing 40 seconds Tan
#725
#711 Fast-Setting carton and porous adhesive 10 seconds Tan
All-Temp, All-Purpose adhesive 60 seconds Clear
#727 New economical alternative to #725 60 seconds Clear
#735 High-strength for wood, plastics, metal 25 seconds Amber
#738 General Purpose for wood, carpet 15 seconds Light Brown
#739 High-strength for wood, auto body 25 seconds Amber
#925 Vinyl, tack strip, and difficult substrates 60 seconds Clear
5
2
Glue Stick Size = 7/16” Diameter (4",10", 15" lengths)
Specialty Nozzles for PRO2 Series Glue Guns
A) “T” Nozzle #6032
B) Block Ribbon Nozzle #102
C) .053 Flat Extension #103F
D) .125 Round Extension #103R
E) .080 Needle Extension #103N
F) .160” Check Valve #101
G) .125 cap #103CS-125
H) .090 cap #103CS-090
I) .076 cap #103CS-076
Note: all nozzles must use check valve adaptor#101
A
B
C D E F
G H I
When using electric tools, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
! WARNING
WARNING: This product contains chemicals known to the State of California to cause cancer,
birth defects,
or other reproductive harm. (This warning is given in compliance with California’s
Proposition 65.)