Owners manual

1. Plug the glue gun into any AC outlet with required specification.
2. Allow the tool to heat for approximately 2-3 minutes. Insert a 7/16” adhesive glue stick into
the back of the gun.
3. When the gun is fully heated, squeeze the trigger slowly, until the melted glue begins to flow
from the nozzle. Release the trigger to stop the glue flow.
Save these safety rules for future use:
1. It is normal for this tool to become quite warm during use. This is normal and does not indicate
a problem.
2. The glue gun should be unplugged after use or if it will not be used within a 2 hour period.
3. If you accidently touch the molten hot glue, immediately immerse the affected area in cold
water and call a doctor. The injured area should be attended by a medical professional.
4. Some materials are heat sensitive and can be damaged by the hot nozzle or even the hot
glue. Whenever possible, test a piece of scrap material or a hidden portion of the object
being repaired.
Shutting down your Industrial Glue Gun
Unplug the glue gun from the power source. Wait one minute for the gun to begin cooling,
squeeze trigger 3 or 4 times to clear nozzle of melted glue and advance glue stick into the melting
chamber. This will allow a quicker startup the next time the glue gun is used. Allow glue gun to
cool in its normal vertical position, after 60 minutes it should be cool enough to put away.
Preventive Maintenance
®
For best results, use only Surebonder 7/16” glue sticks.
DO NOT pull glue stick out of the back of the glue gun or tilt glue gun back, this may cause glue to
flow out back of glue gun, causing a condition called “back-melt.” Back-melt can cause skin burns
and/or permanent damage to the glue gun.
Technical Data
Glue Stick Size = 7/16” (.43") Diameter (10" length recommended)
Heating Power = 80 Watts
Operating Temperature = 193°C / 380°F
Weight = .80 lbs.
OPERATION
Trigger
Insulated Nozzle
Removable Wire Stand
Gun Balancer
Features
• 80 watts
• Lightweight and durable body
• Insulated Nozzle
• Unique trigger and rubber grip handle with ergonomic design
•Removable Wire Stand
• Integrated gun balancer
3
4
®
Safety Fuse
Auto shutdown protection