Use and Care Manual

Pro600 Glue Gun
®
®
FPC Corporation - 355 Hollow Hill Drive - Wauconda, IL 60084
Phone: [phone] Fax: [phone]
website: www.surebonder.com e-mail: [e-mail]
450 Watt Professional/Industrial
Heavy Duty Glue Gun
- 450 Watt heater for greater glue output
- Adjustable temperature control from 284° F to 454° F (140° C to 230° C)
- Non breakable handles and light weight
- Unique effort-saving trigger, with circular TPR handle for comfortable long hour
operation
- Stroke adjustor: Each piece comes with a stroke adjustor, and allows user to
Pre-set the amount of glue output correctly.
Operating Instructions
Read Safety Rules and Instructions Carefully
Save for Future Reference
IMPORTANT SAFETY WARNINGS:
WHEN USING THIS HOT MELT GLUE GUN, ALWAYS FOLLOW BASIC SAFETY
PRECAUTIONS; THIS WILL REDUCE THE POSSIBILITY OF ACCIDENTAL INJURY DUE TO
BURNS OR ELECTRICAL SHOCK.
Wear long sleeves, long pants, heat-resistant gloves and safety goggles - temperature of
glue gun and glue can reach over 400° F and can cause serious burns.
Keep out of reach of children; do not place glue gun where cord can be tripped over. Keep
away from flammable material. It is normal for this tool to become quite warm during use.
This is normal and does not indicate a problem. Do not leave glue gun unattended while it
is on, or in a hot condition.
If accidental skin contact with glue gun nozzle or glue occurs, do not attempt to remove
glue from skin - immediately put burned area into cold water. Call physician if necessary.
Glue gun is for Indoor Use only; do not use outdoors or in wet or damp locations. Never
immerse glue gun in water or other liquid. Use on a clean, dry work surface. Excessive
dust and dirt will reduce the lifetime of this tool.
Do not modify the plug in any way. When unplugging from outlet, do not pull out of the
socket by the cord; grasp the plug and pull out of the outlet. Do not carry tool by the cord.
When glue gun is being serviced or when changing accessories, disconnect from electrical
power source.
Use only recommended accessories and adhesives with this glue gun. Using materials
other than those recommended may result in accidental injury, and permanent damage to
the glue gun.
This glue gun should be unplugged after use, or if it will not be used within a 2 hour period.
After use, allow glue gun to cool completely prior to storage. When not in use, the glue
gun should be stored in a dry, secure location out of the reach of children. The adhesive
can be stored indefinitely in the unheated gun, and remelted by heating up the tool.
Hot Melt Adhesives are not a replacement for structural fasteners. Hot Melt Adhesives
should not be used for projects that will be exposed to extreme heat; glue can soften at 140
F. Do not attempt to remove unused portion of a glue stick from the back of the tool. Do
not expose the glue gun to extreme changes in temperature during or directly after use -
allow gun to air cool only.
Manufacturer assumes no responsibility for consequential or indirect damages from the use
of this product.
Caution: Prop. 65 warning: Handling the coated electrical wires of this product exposes
you to lead, a chemical known to the State of California to cause cancer, birth defects and
other reproductive harm. Wash hands after handling.
1204