User's Manual

This chapter describes how to install

the amplifier and antennas for best

results.

4.1 - Selecting the Locations

Select the locations for the exterior antenna, inte-

rior antenna(s), amplifier, cables, and accessories

as described in the previous chapter.

CAUTION: FAILURE TO PROPERLY PLAN

THE AMPLIFIER INSTALLATION CAN

CAUSE SIGNAL OSCILLATION AND/OR

OTHER EQUIPMENT MALFUNCTION.

4.2 - Soft Installation

Perform a “soft” installation of all components to

test signal coverage and oscillation before making

the installation permanent. Avoid making holes or

other permanent fixtures during this initial phase.

Please refer to Chapter 5 of this manual for config-

uration and testing instructions. Proceed with the

final installation once configuration and testing

are complete.

4.3 - Exterior Antenna

Mount the exterior antenna in the location you

selected during the planning process. Be sure to

follow all of the instructions included with the

antenna to ensure a safe installation. Remember:

CHAPTER 4: Installation