User's Manual
Copyright 2011 Cellphone-Mate, Inc. All rights reserved.
21
This chapter describes how to power
on, configure, and test the amplifier.
5.1 - DIP Switches and Lights
The CM2500W amplifier has the following indica-
tors and controls:
• Gain DIP switches (1): These DIP switches con-
trol the amplification gain.
• Warning light (2): This light illuminates when
signal oscillation is occurring.
• Power light (3): This light should always be
illuminated or blinking green while the ampli-
fier is powered on.
• Power switch (4): Allows you to turn the
amplifier on and off.
When the amplifier is plugged in and powered on:
• The green Power light (3) should illuminate.
CHAPTER 5: Configuration & Testing