User's Guide

SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
3
Introduction
Introducing SureCall’s Force5, Industrial booster Please read this entire manual before proceeding.
with the installation. This manual applies to the Force5 Industrial model
1.1 - Package Contents
Your booster box contains the following items:
• Force5 Booster.
• Mounting kit (not shown).
• DC power supply (not shown).
• Wall anchors (not shown).
1.2 - Features & Benets
The Force5 Industrial booster oers the following features
and benets:
• Powerful in-building booster with 31dB of adjustable gain level.
• Extends cellular signals in areas with poor coverage due to geographical
location and/or building design.
• Suitable for large areas up to approximately 80,000 square feet depending
on outside signal strength and carrier frequency.
• Power control maintains maximum output power at 3 watts EIRP.
• Automatic oscillation detection and protection system powers down the
booster to prevent harmful radio interference.
1.3 - Additional Items Needed
The Force5 booster requires the following additonal components for a
complete installation:
• External antenna (such as the SC-288W omni by SureCall).
• Lightning protector (CMLP).
• Cable splitter if installing multiple antennas.
• Sucient SC-400 ultra low loss interior/exterior cable of 50 ohm.
• Multiple antennas (such as the SC-222W, SC-223, or SC-224 omnidirec-
tional domes and/or SC-248W at panel by SureCall).
• Grounded surge suppressor for DC power supply.