User's Guide
Table Of Contents
SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com
9
Step 3. Install the Inside Amp and Inside Antenna.
Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the outside antenna.
Consider the below factors affecting booster performance.
1. Signal strength at the location of the outside antenna.
2. Interior building materials between the inside antenna and your mobile device.
3. Distance between the outside antenna and inside antenna (minimum 25 ft. separation)
Note: This booster should not be used near open re or ame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment.
Panel Antenna
SureCall’s Inside panel antennas are directional with a 120˚ reach. They should be mounted facing the area signal is needed
and away from the outdoor antenna (See “Aiming Directional Antennas” on page 8).
Mount on a vertical surface that is the approximate height of normal cell phone use.
The antenna may be concealed behind a wall provided there are no materials that
could obstruct signals.
Besides the antenna itself, parts include mounting equipment for a at horizontal
surface.
1. Using plate, mark position of desired screw placement.
2. Screw mounting plate into place with the slide panel protruding towards you.
3. Slide antenna securely onto mounting plate.
4. Connect antenna to one end of the SC-240 cable and run to location of your host
amp
5. Place the host amp on a at surface or mounted to a wall and connect the
remaining end of the SC-240 cable to booster port marked INSIDE.
Panel Antenna
Fusion4Home Max inside
host amplier and power supply
Mounting
Plate
Anchors /
Screws