User's Manual

LTE Active Antenna User Manual
3
Overview
The LTE Active Antenna is a signal booster that, when placed on a window and connected to your router,
delivers improved LTE signal to the LTE Router to improve data throughput speeds.
Before Installation
Remove Contents from packaging
Contents
• LTE Active Antenna with mounting adhesive
• Power Adapter
• Power Injector
• Velcro straps and cable clips
Figure 1: Contents
Installation
Step 1 Connect the Power Injector Antenna Cable onto the Antenna Port
Step 2 Connect the Cable from the LTE Active Antenna to the Power Injector
Step 3 Power up using the Power Adapter and connect the other end into the Power Injector
Plug in the power adapter, then plug the other end into the power injector.
Once connected, a GREEN LED on the power injector will appear to indicate that the LTE Active Antenna
is receiving power. If the power injector is showing a RED LED, please double check that all cables are
connected securely.
If your LTE Router was not already turned on, please turn it on now.
Please note – If you power on the LTE Router while the LTE Active Antenna is connected to the antenna
port on the router but not connected to power, the router may not complete its boot up process properly
and will not work as expected. If this occurs, please turn off the router and ensure the LTE Active
Antenna is connected to power before turning the LTE Router back on.