User's Manual
Table Of Contents
- Overview
- Before Installation
- Installation
- Step 1 Connect the Power Injector Antenna Cable onto the Antenna Port
- Step 2 Connect the Cable from the LTE Active Antenna to the Power Injector
- Step 3 Power up using the Power Adapter and connect the other end into the Power Injector
- Step 4 Identify the Location for Placement of the LTE Active Antenna
- Step 5 Mount the Antenna at the Identified Location
- Step 6 Route and Secure the Cables
- Product specifications
- Regulatory Information
LTE Active Antenna User Manual
4
Step 4 Identify the Location for Placement of the LTE Active Antenna
Identifying and mounting the LTE Active Antenna in the location of your with the best available LTE signal
will provide the best performance of your LTE Router. The best signal and recommended mounting
location for the antenna will be on a window.
Step 5 Mount the Antenna at the Identified Location
Once the best mounting location has been identified, prepare the area by cleaning it first (rubbing alcohol,
window cleaner and similar solutions work well). Once the area has thoroughly dried, mount the antenna
by removing the paper backing from the adhesive padding and firmly pressing it against the cleaned area.
Please ensure the antenna is mounted vertically with the cable pointing down for the best performance.
Step 6 Route and Secure the Cables
Using the included cable clips and Velcro straps, route the cables as desired for the cleanest possible
installation. If Velcro straps are used, coil the excess cable before wrapping to ensure a clean look and
installation.