Use and Care Manual

SureCall | www.surecall.com | 1-888-365-6283 | [e-mail]
12
Specications
SPECIFICATIONS
Flare 3.0 (U.S.) ; Flare 3.0 CA (Canada)
Uplink Frequency Range (MHz): 698–716 / 776–787 / 824–849 / 1850–1915 / 1710–1755
Downlink Frequency Range (MHz): 728–746 / 746–757 / 869–894 / 1930–1995 / 2110–2155
Donor/Server Port Impedance: 75 ohm / 50 ohm
Maximum Gain: 72 dB
Noise Figure: 7 dB
VSWR: ≤2.0
Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G and all cellular standards
AC Input: Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A
Maximum Output Power: 1 Watt EIRP
Cable: RG6 (50 ft.)
RF Connectors: Donor port: F Female, Server port: Integral
Power Consumption: <12W
Weight: 1. 8125 lb.
Dimensions: 5.125 × 7.25 × 5.625 inches
Certications: FCC ID: RSNFLARE-3 ; IC : 7784A-FLARE3
Note: The term “IC” before the radio certication number only signies that Industry Canada technical specications were met.
Kitting Information
Component Product
number
Gain/Loss Note
LTE-A
707 MHz
LTE-V
731 MHz
Cellular
800 MHz
PCS
1900 MHz
AWS
1700 / 2100 MHz
Outdoor Antenna* SC-289W 3 dBi 3 dBi 3 dBi 4 dBi 4 dBi / 4 dBi
SC-231W 8 dBi 8 dBi 8 dBi 10 dBi 10 dBi / 10 dBi
Outdoor Cable* SC-RG6-50 3.32 dB 3.32 dB 3.95 dB 6.42 dB 6.22 dB / 6.68 dB 50 Feet or longer
Indoor Antenna SC-322W 2.5 dBi 2.5 dBi 3 dBi 5 dBi 4 dBi / 5 dBi
*Note: The Flare 3.0 booster is suitable for use with all equivalent and lower gain antennas, as well as, equivalent or greater lengths of cable.