Application Guide

Specification
Installation Example:
SureCall Fusion4Home Omni/Panel kit
Voice and 4G LTE Data Cell Signal Solution
Fusion4Home
™
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to
the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least
20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or
may be inaccurate for calls served by using this device. This device may be operated ONLY in a fixed location for in-building use.© 2017 SureCall
698–716 / 776–787 / 824-849 / 1850–1915 / 1710–1755 (G Block Included)
728–746 / 746–757 / 869–894 / 1930–1995 / 2110–2155 (G Block Included)
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
75Ω donor port / 50Ω server port
8 dB
1 Watt EIRP
RG-6 / SC-240
F Female (outside), N Female (inside)
<15W
7.875 x 5 x 1.188 inches
2 lb 3 oz.
≤2.0
Uplink Frequency Range (MHz):
Downlink Frequency Range (MHz):
Supported Standards:
Input Impedance:
Maximum Gain:
Noise Figure:
VSWR:
AC Power Transmitter:
Maximum Output Power:
Cable:
RF Connectors:
Power Consumption:
Dimensions:
Weight:
Model No.
Fusion4Home
Cellular - 65 dB / PCS - 72 dB / LTE(A) - 63.5 dB / LTE(V) - 64 dB / AWS - 71 dB
Input AC 110V, 60 Hz; Output DC 5-15V
Specifications are subject to change. Specifications contained within apply only to products meeting the latest FCC Certification Guidelines.