Fusion4Home™ Omni / Panel Cellular Booster Kit User Guide
Introduction Thank you for purchasing SureCall’s Fusion4Home cellular signal booster kit. SureCall’s Fusion4Home was specifically designed to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing cellular signals in homes and offices. If you have any questions during setup, please reach out to our US-based experienced support technicians: Call: 1-888-365-6283 Email: support@surecall.
Table of Contents TABLE OF CONTENTS How it works ..................................................................................................................................... 4 PACKAGE CONTENTS......................................................................................................................... 4 BEFORE INSTALLATION...................................................................................................................... 6 Installation Overview..........................
How It Works How it works 1. An outside antenna collects signal from the cell tower. 2. The outside antenna sends the signal to the booster through coax cable. 3. The booster amplifies the cell signal and rebroadcasts the signal indoors from via the inside antenna to all mobile devices within range. 4. The system also works in reverse amplifying outgoing signal back to the tower.
Package Contents Your Fusion4Home signal booster package includes the following items: 1. SureCall Fusion4Home signal booster and power supply 2. Cable for connecting the outside antenna to the signal booster (RG6, 50 ft) 3. Cable for connecting the booster to the inside antenna (SC-240, 20 ft) 4. One outside omni antenna 5. One Inside panel antenna 1. Fusion4Home Cellular Booster and power supply 4. Outside Omni Antenna 2. Outside Cable (50 ft) 3. I nside Cable (20 ft.) 5.
Before Installation BEFORE INSTALLATION 1. Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments may be needed to optimize performance. 2. Ensure adequate separation between the planned locations of the inside and outside antenna – at least 25 ft (see “Antenna Separation” Diagram). 3. Ensure the directional antenna is oriented in a way that it does not “face” the inside antenna (see “Aiming Directional Antennas” Diagram). 4.
Installation Poor Good -60 dB -50 dB Signal Strength -70 dB Android devices: download the app “Network Signal Info” in the Google Play store. -80 dB • -90 dB Apple iPhones: Dial *3001#12345#* and press Call. In the top-left corner, a dB number appears instead of bars. -100 dB • Excellent Step 2. Install the Outside Antenna After identifying the area of strongest signal, choose the surface where you will mount the outside antenna. Using the provided hardware, mount the outside antenna.
Installation 6. Connect antenna to one end of the provided RG6 cable and tighten the connection. Run the cable along route to planned location of your booster. Note: Alternate screws may be required for differing surfaces such as wood or concrete. L-Bracket Screws Nuts & Washers Anchors / Sleeves Cable Omni Antenna Install Illustration Step 3. Install the Booster and Inside Antenna.
Installation 3. Slide antenna securely onto mounting plate. 4. Connect antenna to one end of the SC-240 cable and run to planned location of your booster 5. Place the booster on a flat surface or mounted to a wall and connect the remaining end of the SC-240 cable to booster port marked INSIDE. IMPORTANT:: FCC 27.
Installation N connector to inside antenna Power Switch Connector to Inside Antenna 44 54 OFF 64 54 OFF 64 55 OFF 65 62 OFF 51 72 61 OFF 71 44 45 52 Power Jack Screw tab holes for optional wall mounting F connector to outside antenna Booster Diagram Note: C hanges or modifications not expressly approved by SureCall could void user’s authority to operate the equipment. This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply.
LED Indicators LED INDICATORS LED Color LED Condition Resolution Yellow Solid Indicates that the frequency band is not being used. After a period of time, if there’s no activity, that band will go into sleep mode. Light is off while band is active. This is part of normal operation. Yellow Flashing Indicates that the Automatic Gain Control (AGC) is self-adjusting. This is part of normal operation.
Troubleshooting & Specs TROUBLESHOOTING If you have any questions during setup, please reach out to our US-based experienced support technicians: Call: 1-888-365-6283 Email: support@surecall.com Problem Resolution Signal booster has no power Connect the power supply to an alternate power source. Verify that the power source is not controlled by a switch that has removed power from the outlet. If the POWER LED on the signal booster is OFF, return the power supply to SureCall.
Kitting Kitting Information Component Product number Gain/Loss Note LTE-A LTE-V Cellular 707 MHz 731 MHz 800 MHz PCS 1900 MHz AWS 1700 / 2100 MHz Outdoor Antenna* SC-289W-75Ω 3 dBi 3 dBi 3 dBi 4 dBi 4 dBi / 4 dBi SC-231W-75Ω 7 dBi 7 dBi 8 dBi 10 dBi 10 dBi / 10 dBi Outdoor Cable* RG6 - 50 (50’) 3.32 dB 3.32 dB 3.75 dB 6.42 dB 6.22 dB / 6.68 dB 50 Feet or longer Inside Cable* SC-240-20NN (20’) 2.06 dB 2.06 dB 2.29 dB 3.56 dB 3.36 dB / 3.
FCC, IC & Safety FCC & IC INFORMATION Important: Before installing your booster you need to register it with your carrier. You can do so online at the following urls: Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/ T-Mobile: https://support.t-mobile.com/docs/DOC-9827 Sprint: https://www.sprint.com/legal/fcc_boosters.html U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.
Warranty WARRANTY Three-Year Product Warranty To activate your three-year manufacturer’s warranty, register your SureCall product at www.SureCall.com SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014.
SureCall, Inc 48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 | www.surecall.com This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer.
