User Guide

SureCall | 1-888-365-6283 | [e-mail] | www.surecall.com
12
Step 3. Install Indoor Antenna(s)
Indoor antennas may be either omni-directional ceiling mount or directional panel antennas. One
indoor cable is provided per antenna. For kits with multiple antennas, a cable splitter and joining
cable is also supplied.
It is highly recommended that you complete test the placement of your system before a securing the
permanent installation for each part.
• For indoor dome antennas, mount on a ceiling in a central location where signal is needed.
• For indoor panel antennas, mount on a wall that faces in the direction signal is needed.
The antenna location should allow for sufcient separation between the outside antenna and inside
antenna. Vertical separation is preferred as it is more effective than horizontal separation.
The minimum separating distance recommended is 50
vertical feet; however, increased separation, may be needed,
especially where vertical separation cannot be achieved.
Range provided by an antenna is dependent on the following
factors:
1. Signal level received by the outdoor antenna
2. Physical obstructions between the antenna and mobile
devices
3. Isolation / separation between the outdoor and indoor
antennas
Option A:
Omni Antenna
Option B:
Directional Antenna
Antenna aiming and Isolation
A signicant factor in determining
booster coverage performance
Splitter (for multiple antenna kits)
InstallatIon