Tri-Band Wireless Adjustable Signal Booster INTRODUCTION 2 PRINCIPLES OF OPERATION 2 SURECALL TRIFLEX PACKAGES 3 TRIFLEX BOOSTER HARDWARE 4 INSTALLATION 5 PACKAGE CONTENTS 5 SITE SELECTION 5 INSTALLATION INSTRUCTIONS 6 TROUBLESHOOTING 10 FREQUENTLY ASKED QUESTIONS 12 3G – 4G Home Signal Booster Kit TRIFLEX-A for AT&T 2G thru 4G OBTAINING TECHNICAL SUPPORT 12 WARRANTY 13 SPECIFICATIONS 15 SAFETY INFORMATION 16 (TRIFLEX-A) User Guide TRIFLEX-A HOME KITS MN-AMP-01
INTRODUCTION Introduction Congratulations on purchasing the SureCall TriFlex - A kit for 2G-3G, all carriers, and 4G LTE for AT&T, the finest cellular signal booster available! SureCall adjustable cellular boosters and kits from Cellphone-Mate remove the frustration over dropped calls, limited range, and slow data rates by amplifying incoming and outgoing cellular signals in personal residences and homes.
INTRODUCTION SureCall TriFlex Packages TriFlex Antenna Kitting Information Component Product Number (Description) Gain/Loss LTE-A 800 MHz 1900 MHz Outdoor Antennas* CM288W 3 dBi 3 dBi 4 dBi CM230W 10 dBi 10 dBi 10 dBi Outdoor Cable* CM240-40FN (40 feet) -3.52 dB -3.98 dB -6.52 dB CM400-75NN (75 feet) -4.22 dB -4.41dB -6.17 dB CM240-20FN (20 feet) -2.06 dB -2.29 dB -3.56 dB CM400-30NN (30 feet) -2.05 dB -2.12 dB -2.
INTRODUCTION TriFlex Booster Hardware The following figure shows the key hardware components on the TriFlex 65dB cellular booster. Refer to this figure as you install your SureCall TriFlex components. Outdoor Antenna Connector PCS Dial Cellular Dial LTE/AWS Dial Alert LEDs Power LED (not shown) Power Connector (not shown) Indoor Antenna Connector SureCall TriFlex - A Kit for Home Cellphone-Mate, Inc. All rights reserved.
INSTALLATION Installation Package Contents Unpack all package contents and check for damage. For missing or damaged items, contact your reseller. Keep the carton and packing material to store the product or if you need to return it. Site Selection For optimum performance, select a location for your outside antenna that: Provides the best signal strength possible. To measure your existing cell signal on an Apple iPhone, dial *3001#12345#*and press Call.
INSTALLATION Installation Instructions The TriFlex booster is suited for installation in a building or home. Step 1. Connect the Outside Antenna 1. Mount the fiberglass antenna in an outside mounting location that: Has at least a 12-inch radius clear of obstructions and other radiating elements. Is at least 75 feet in a straight line from the inside antenna when used in an area prone to weak cellular signals and operating the booster at full 65dB gain.
INSTALLATION Step 2. Connect the Inside Antenna 1. Mount the inside antenna: Omnidirectional dome antenna: mount the antenna on the ceiling in a central location where you want reception. Panel antenna: install the antenna against a wall or surface projecting where you want reception. 2. Using the CM240 or CM400 cable, connect the inside antenna to the booster connector marked INSIDE (see page 4). 3. Hand tighten the connection. Step 3. Mount the Booster (Optional) 1.
INSTALLATION To remove the booster, rotate it across the Velcro. Do not pull the booster or cables. Step 4. Connect to AC Power 1. Connect the AC power cord to the booster (see page 4). 2. Connect the plug on the other end to a 110V AC power outlet. Be sure all connections to the booster are tight and secure. The booster turns on automatically. The Power LED goes ON to show that the booster is ready for use (see page 4).
INSTALLATION Step 5. Configure Gain Settings 1. Facing the front of your booster, find the PCS, Cellular, and LTE / AWS dials on the top of the booster (see page 4). 2. Set the following dials according to the coverage area and the distance between the indoor and outdoor antennas (see the table below). If Coverage Area is... and Antenna Separation is... Set All Dials to...
TROUBLESHOOTING Troubleshooting In the unlikely event you encounter a problem, use the following steps to identify and resolve the issue. Problem Booster has no power 1. 2. 3. 4. After installing the booster system, you have no signal or reception. 1. 2. 3. One of the red lights next to the dials on your booster is flashing red. 1. 2. 3. SureCall TriFlex - A Kit for Home Resolution Verify that the switch on the power supply is turned on and red LED is ON.
TROUBLESHOOTING Problem Your booster restarted and shut down for 15 minutes, and is now shut down permanently. The red LED goes ON. The Power LED does not turn ON. The Alert LEDs flash after the initial activation period. The Alert LEDs continue to flash. SureCall TriFlex - A Kit for Home Resolution Each SureCall booster is equipped with Auto Shutdown to prevent cell tower interference. The outside antenna may be close to a cell tower.
FREQUENTLY ASKED QUESTIONS Frequently Asked Questions For a list of Frequently Asked Questions and a comprehensive, up-to-date Troubleshooting Guide, please visit our website at: www.surecall.com or call us at 1-888-365-6283. Obtaining Technical Support You can also consult a Cellphone-Mate technical specialist directly by emailing us at support@surecall.com.
WARRANTY Warranty Two-Year Product Warranty Cellphone-Mate warrants its products for two years from the date of purchase against defects in workmanship and/or materials. Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container.
WARRANTY Limitations of Warranty, Damages and Liability: EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING. CELLPHONE-MATE AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC.
SPECIFICATIONS Specifications Specification TRIFLEX–A Uplink Frequency Range: Cellular–800: PCS: LTE–A: 824 – 849 MHz 1850 – 1910 MHz 698 – 716 MHz Downlink Frequency Range: Cellular–800: PCS: LTE–A: 869 – 894 MHz 1930 – 1990 MHz 728 – 746 MHz Supported Standards: CDMA, GSM, LTE Input/Output Impedance: 50 Maximum Gain: Cellular–800: PCS: LTE–A: Noise Figure: 5 dB VSWR: 2.
SAFETY INFORMATION Safety Information Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
48346 Milmont Drive Fremont, California 94538 USA 888.365.6283 Fax: 510.996.7250 www.surecall.com Cellphone-Mate has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers.
