User Manual

5
Changing the temperature unit
between˚C & ˚F
How to scan an animal's microchip
Insert the batteries as instructed on page 4. Then press the
button on the reader (as indicated) to turn it on. The reader will
automatically turn o when not in use.
1
When the reader detects a microchip, the number will appear on
the LCD screen. (It will also display the Microchip Temperature if
the animal has a temperature-sensing microchip).
3
To change the temperature unit displayed on the reader,
rst remove the batteries. Next, press and hold the
reader’s button while re-inserting the batteries. The
temperature will now be displayed in Celsius. To revert
to Fahrenheit, please repeat the process.
Scanning Pattern 2
Up and down the body
Scanning Pattern 1
Side to side across the
body
Microchips are normally located between the animal’s shoulder blades.
Press the button again and position the reader between the
animal’s shoulder blades, maintaining light contact with the fur.
Move the reader, following the recommended scanning patterns
shown below.
2