User's Manual
8
EN
The lid will open and the light
will flash green once every second. The
feeder will stay in this mode until a pet is
learnt or if you cancel with a second press
of the Add Pet ( ) button.
When your pet eats from the bowl and has
been learnt, the light will stop flashing and
remain on. When your pet moves away from
the feeder the lid will close and the green
light will turn o. Their microchip number is
now stored permanently in memory, even
when the batteries are removed.
Press the Add Pet ( ) button found
on the rear of the feeder.
Put some food/treats into the bowl
and place the feeder where you would
normally feed your pet.
If you want to use the feeder for more than one pet, you can do this by repeating the process.
You are able to store up to 32 pets in each feeder.
2
4
1
3
When learning your pet into the feeder, make sure all other pets are kept away. If the wrong
pet is accidentally learnt you can perform a factory reset, as detailed in the troubleshooting
- see page 16. You can also use the SureFlap RFID Collar Tag if your pet does not have a
microchip and wears a collar.
Learning your pet into the feeder
In order to learn a pet’s microchip number, sensors located in the hoop at the front of the feeder
must detect a pet’s presence. Therefore it is important to ensure that your pet places their head
through the hoop to eat. No amount of waving your pet in front of the feeder will have an eect.