User Guide

1)0 N0’l’ store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
app1iancc.
\%ARNING
DO NO’I’ try lighting this appliance
without reading the “I.IGHTING
INSTRUCTIONS” section of this manual
IMPORTANT: Remove all protective plastic film from
stainless steel parts prior to assembly/use. This film is
installed at the factory to prevent damage that could occur
during shipment and handling.
LEFT SHELF ASSEMBLY
1. Open the grill hood and place a piece of
Styrofoam from the packaging under the grill hood to
prop the grill hood
open slightly. (See Fig. 1)
2. Attach the left shelf by
inserting the four shelf
hooks into the slots on the side of the grill. (See Fig.
1)
3. After Inserting the four shelf hooks,
press the
shelf against the grill and press downward until the
shelf locks in place. Make sure the lop strip is
hanging all the way inside of the grill before pressing
downward. (See Fig. 1)
4. Install one self tapping screw into the bottom
front hole of the shelf to lock shelf in place. (See Fig.
2)
SJDE$JJflfr2&EB1ARIS.AS~E!4WW1
1. Remove side burner assembly from
packaging. (See Fig. 3)
2. Place a piece of Styrofoam from the
packaging in the grill to leave the grill hood propped
open slightly.
(See Fig. 4)
3. Attach the right side burner by inserting the four
shelf hooks into the slots on the side of the grill. (See
Fig. 4)
4. After inserting the four shelf hooks, press the
side burner shelf against the grill and press downward
until the shelf locks in place. Make sure the top strip is
hanging all the way inside of the grill before pressing
downward.
.
Grill
Assembly
(See Fig. 4)