User's Manual

54 Administrator’s Guide SurfControl RiskFilter - E-mail V5.2.4
S YSTEM S ETTINGS
User Management
2
6 Choose the server that will provide the authentication for this user from the ‘Server’ drop-down list.
7 Click Add>>. This will add it to the list pane on the right. To remove a server, select it and click
<<Remove.
8 Click Submit to put the new settings into effect or Reset if you want to cancel the modifications made
to the current settings.
Authenticating remote users
To authenticate remote users you first need to configure an LDAP connection and then add the user’s
domain to RiskFilter:
1 Configure an LDAP connection. See “User Directories” on page 13 for information on how to do this.
2Select User Management > User Authentication from the System Settings tab.
3 Click Add.
4 Enter a name for the account into the Description field. This is limited to 64 characters.
5 Choose the domain that this user belongs to from the Domain list box.
6 Click Add>>. This will add it to the list pane on the right. To remove a domain, select it and click
<<Remove.
7 Select the LDAP connection you have just created from the Directory drop down menu.
8 Click Add>>. This will add it to the list pane on the right. To remove a server, select it and click
<<Remove.
9 Click Submit to put the new settings into effect or Reset if you want to cancel the modifications made
to the current settings.
Note: Remote users will need to configure their mail clients to authenticate to the Riskfilter
server when sending mail. They should use their email address as the username and their
network password.