User guide

Page 21
SX-AX15 (20) User Manual
VI. Command Line Interface (CLI) Protocol
(continued)
AutoPing Commands
Command
Description
Admin
Fact Def
get autoping <1
‐
16>
Returns the settings and state of the selected autoping. Yes
set autoping <1
‐
16> ipaddress <dotted decimal>
Set the IP address of the selected autoping in dotted
decimal.
Yes 0.0.0.0
set autoping <1
‐
16> action <action>
Set the action of the selected autoping. On-Follow, On-
Latch, Off-Follow, Off-Latch, Cycle, Cycle-Once, or None.
Yes None
set autoping <1
‐
16> frequency <1
‐
999>
Set the frequency of the selected autoping in seconds. Yes 10
set autoping <1
‐
16> count <1
‐
99>
Set the number of failures the selected autoping requires
before it triggers its action.
Yes 3
set autoping <1
‐
16> device <name | #1
‐
16> outlet <1
‐
8>
Assign an autoping to either a device/outlet or group.
Each autoping can be assigned to one or the other.
Yes
set autoping <1
‐
16> group <name>
Yes
Email Commands
Command
Description
Admin
Fact Def
set email enable <yes | no> Enables or disables the email reporting system. Yes No
get email Returns the current settings of the email client of the root Axess. Yes
set email server <dotted decimal> Set the IP address of an SMTP or ESMTP server. Yes 0.0.0.0
set email address <return address> Set the return address of the root Axess email client. Yes 0.0.0.0
set email username <username> Set the user name for the mail server. Yes 0.0.0.0
set email password <password> Set the password for the mail server. Yes 0.0.0.0
set email retry <1
‐
999>
Set the number of retries for failed email reporting. Yes 3
send test mail <username> Send a test email to the selected user. Yes